The Benefits of a Central AC Unit

Central air conditioning uses ductwork to deliver cooled air to every room. An air handler with filters that trap particulates regulates the flow of air.

The unit is usually located in an enclosure that is outside the house. The unit’s quiet operation will increase your comfort as it will stop the constant hum and whirrrr of window AC units from disrupting indoor peace.

Energy Efficiency

Although central air conditioners consume more energy than wall-mounted units, today’s systems are more efficient than the ones used in the past. The ozone-depleting refrigerant R22 was eliminated in 2006 and has been replaced with an environmentally friendly product known as 410A, and manufacturers are constantly innovating new technologies to enable their systems to use less energy.

Central AC systems, unlike window AC units, which are designed to cool only the area in which they’re placed they can distribute cool air evenly throughout your home by using air ducts. The cooling process starts when your thermostat tells the air handler to start the process of cycling. The air handler is able to pull hot air from your home and then passes it over the evaporator, that is filled with cool refrigeration. The heat from the air causes refrigerant absorb energy before it transforms into gas. The refrigerant is then transported to the outdoor unit and the compressor increases its temperature and pressure. As it pumps, it pushes the heat away from the evaporator coil back into the home, where it’s cooled and distributed through your ductwork again.

Central AC systems are most efficient when it comes down to regulating temperature in large spaces. They can cool rooms that are farther apart than a single AC unit and have greater energy efficiency.

Depending on how well your house is insulated and sealed, and also the layout, you might find that a mini-split system can save you even more energy than a central air conditioner however. Mini-splits are different from central ACs, but they are more efficient since they don’t use ductwork. Ductwork leaks and could cause the system to overwork to cool your home to the desired temperature. Talk to an HVAC expert from your local Dallas heating company if you are interested in learning more about energy-efficient options for cooling your house. They can assist you in finding the best solution for your needs.

Convenience

Central air conditioning systems aren’t only efficient and comfortable, they also offer a great amount of convenience. These systems can cool the entire office or home in one unit, and do not require ducts as window units do. They are also usually equipped with high-quality air filters that can help to keep pollutants and allergens out of the air. This is particularly helpful for those suffering from respiratory issues or allergies.

Central AC is one of the most well-known kinds of cooling systems, and for good reason. It is ideal for homes that already have ductwork and need a powerful cooling solution. These systems are able to deliver cool air to each room with just one vent. They can also be used with home zoning, which permits you to control the cooling requirements in different areas of your home with a smart thermostat.

This is the most commonly used AC system. It functions in a similar fashion as furnaces. Central air conditioners have an outdoor unit that blasts warm air and a smaller inside unit that pulls hot or cold air out of the ductwork. The refrigerant is pumped out of the air handler via lines, which absorb heat. The cool air is pushed back into air handler and is circulated to other rooms via the ductwork.

Another benefit of central air conditioning is that it can also aid in reducing humidity. This is especially important in our humid climate. The air handler will remove excess moisture from your ductwork, and release it outside. This helps prevent mold and mildew growth.

It’s time to replace your cooling system if older than 15 years. A new, high-quality AC system will help you save money on energy costs and will help protect the integrity of your home’s ductwork. For more information about Chancey & Reynolds’ cooling solutions, contact us. We can help you choose the right air conditioner for your budget and needs.

Maintenance

As with any major appliance the air conditioner also requires regular maintenance to ensure it runs smoothly. Some routine maintenance tasks can be handled by the homeowner while others should be left to certified professionals. Signing an agreement for maintenance is the best way to stay on the top of AC problems. These agreements typically offer discounts on repairs, as well as other advantages, like priority scheduling.

Clean the Condenser Unit

A condenser unit that is dirty can restrict air flow, reduce the efficiency of the system and increase the cost of energy. To avoid the build-up of dirt and debris shut off the power supply to the compressor unit prior to when you begin cleaning. Then, using the help of a garden hose and rag, gently clean the blades and coil fins of your fan to eliminate dirt, twigs and leaves. After cleaning, wipe the blades using a paper towel and a sanitation spray. It is also recommended to straighten out any noticeable bent fins, which could be caused by the wind or other weather conditions.

Line Sets

If your central air conditioner has been running for more than 10 years, it is recommended to engage a professional to check the line sets. These are the copper tubes that connect the indoor evaporator coil to the outdoor compressor and condenser. The lines carry refrigerant and any cracks or rust could cause leaks that will cause low cooling and costly cost of energy.

Air Filter

To improve the performance of your AC system, you should change your air filter on a regular basis. The frequency of changing your air filter will depend on how often you use the AC, how many pets reside in the house and the amount of dust gets accumulated. A typical air filter should last for about two weeks to one month during the cooler season.

Condensate Drain Line

If the drain line for your condensation is blocked by mold, algae or bugs, the accumulated water on the evaporator coil won’t be able to be flushed away. This can lead to flooding of your basement, water damage to your home, and mold and mildew growth. To prevent this from happening the float switch near the indoor evaporator will shut off the system when it determines that the drain line has become blocked.